| 811 EN ISO 14116 ANSI/ISEA 101 EN 1149 EN 14126 EN 13982-1 EN 13034 EN 14605 EN 14605 PHYSICAL FABRIC TEST: The fabric used in these garments is designated BizTex SMS fabric and BizTex Microporous fabric. BizTex SMS FABRIC CLASS BizTex MICROPOROUS FABRIC CLASS BizTex SMS FR FABRIC CLASS Abrasion Resistance EN530 Class 1 (min) - 6 (max) 2 2 3 Flex Cracking Resistance EN 7854 B Class 1 (min) - 6 (max) 6 5 6 Trapezoidal Tear Resistant EN ISO 9073-4 MD Class 1 (min) - 5 (max) 1 3 1 EN ISO 9073-4 XD Class 1 (min) - 5 (max) 2 2 3 Tensile Strength EN ISO 13934-1 MD Class 1 (min) - 5 (max) 2 1 2 EN ISO 13934-1 XD Class 1 (min) - 5 (max) 2 3 2 Resistance To Ignition EN13274-4 Pass Pass Pass Puncture Resistance EN 863 Class 1 (min) - 3 (max) 2 1 1 Stream Strength EN ISO 13935-2 Class 1 (min) - 5 (max) 3 4 3 Fire Retardancy EN 14116 Index 1 CHEMICAL FABRIC TESTS BizTex SMS FABRIC BizTex MICROPOROUS FABRIC BizTex SMS FR FABRIC Penetration Class Repellency Class Penetration Class Repellency Class Penetration Class Repellency Class Sulphuric Acid30% - Class 1 (min) - 3 (max) 3 3 3 3 3 3 SodiumHydroxide10% -Class1(min) -3(max) 3 3 3 3 3 3 O-xylene: Class 1(min) - 3(max) 3 2 0 3 3 2 Butan-1-ol: Class 1(min) - 3(max) 3 2 0 0 3 2 BIZTEX PERFORMANCE CHART PERFORMANCE CHART FOR GARMENTS CONSTRUCTED FROM BIZTEX MICROPOROUS FABRIC AND BIZTEX SMS FABRIC EN 13034: 2005 +A1: 2009 (Type 6) Reduce spray suit (Type 6) and partial body protection items (PB6). This specifies the minimum requirements for chemical protective clothing offering limited protective performance against liquid chemicals. This standard tests for liquid chemical (Type 6 and Type PB [6] equipment) sprays and splashes that are not directional or built up on a suit but there may be a fine mist of droplets in the atmosphere. EN ISO 13982 - 1 :2004 + A1 :2009 (Type 5) Dry particle suit. This specifies the minimum requirements for chemical protective clothing resistant to penetration by air borne solid particles. Protects against hazardous dust and dry particles. Liquid Tight Suits. (Type 3) This test involves exposing a whole suit to a series of short jets of a water based liquid, aimed at various critical parts of the suit. This suit protects against strong jets of liquid chemical. Spray Tight Suits. (Type 4) Test involves exposing a whole suit to an intense spray of a water based liquid. This suit protects against saturation of liquid chemicals. EN 14605: 2005 +A1:2009 Protective Clothing Against Liquid Chemicals. This standard specifies performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only. (Types PB [3] and PB [4]) EN 14126: 2003 This specifies the requirements and test methods for limited use protective clothing providing protection against infective agents. EN 1073-2: 2002 Protective clothing against radioactive contamination. Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination. EN ISO 14116: 2015 This standard specifies the performance requirements for the limited flame spread properties of materials, material assemblies and protective clothing in order to reduce the possibility of the clothing burning and thereby itself constituting a hazard. Additional requirements for clothing are also specified. Indicates compliance with current European standards for chemical protective clothing. ANSI/ISEA 101 2014 American National Standard for Limited-Use and Disposable Coveralls - Size and Labeling Requirements. EN 1149 -5: 2018 Electrostatic requirements - surface resistivity (test method and requirements). This tests for the removal of electrostatic to avoid sparks that could cause fire/ hazard to the wearer. PROVIDING EN STANDARD PROTECTION NUCLEAR PARTICLE CHEMICAL PROTECTION
RkJQdWJsaXNoZXIy MTkwMjk0